Genuine Tumble Dryer Door Striker Pin Fits Sharp Bush Smeg Brandt 42190493
Genuine Tumble Dryer Door Striker Pin Fits Sharp Bush Smeg Brandt 42190493
If your tumble dryer door will not stay closed, or the dryer will not start even though the door is shut, the striker pin on the door may be broken or worn. This is the genuine door striker pin, part number 42190493, for selected Sharp, Bush, Smeg and Brandt tumble dryers. Fitting a new pin lets the door latch securely and press the door switch again so the dryer can run.
Product Details
- Product Type: Tumble Dryer Door Striker Pin (door switch pin)
- Main Part Number / MPN: 42190493
- Alternative / Manufacturer References: G02783SH (Sharp reference listed by a UK supplier)
- Part Category: Laundry - Tumble Dryer Door Parts
- Appliance Types: Tumble Dryers
- Brand Compatibility: Selected Sharp, Bush, Smeg and Brandt models
- Part Type: Genuine Original Part
- Pack Includes: 1 x door striker pin
What This Part Does
The striker pin sits on the inside of the dryer door. When you close the door it pushes into the door switch in the cabinet, holding the door shut and telling the dryer it is safe to run. The pin takes a knock every time the door is closed, so it can crack, wear or snap off, especially if the door is slammed.
Common Fault Symptoms
- The door will not stay shut or springs back open
- The dryer will not start because the door is not detected as closed
- The door opens part way through a cycle
- The pin on the door is visibly cracked, loose or missing
Known Compatible Brands & Models
View compatibility information
This pin is used across tumble dryers built by the same manufacturer and sold under several brands. The models below are listed by UK parts suppliers against part 42190493. The model number is usually on a label inside the door opening.
Compatible Models
- Sharp: KD-HH8GW1-BE, KD-HH8GW-BE, KD-HHB7S7GW21-IT, KD-HHB7S7GW2-IT, KD-HHB8S7GW2-IT, KD-HHB9S7GW2-IT, KD-HHH7S7GW2-EE, KD-HHH7S7GW2-FR, KD-HHH7S7GW2-IT, KD-HHH7S7GW2-PL, KD-HHH7S8GW3-IT, KD-HHH7S8GW3-PL, KD-HHH8S7GW21-CB, KD-HHH8S7GW2-BX, KD-HHH8S7GW2-CZ, KD-HHH8S7GW2-DE, KD-HHH8S7GW2-EE, KD-HHH8S7GW2-EN, KD-HHH8S7GW2-IT, KD-HHH8S7GW2-PL, KD-HHH8S7GW2-UA, KD-HHH8S8EW3-FR, KD-HHH8S8GW3-DE, KD-HHH8S8GW3-EE, KD-HHH8S8GW3-IT, KD-HHH8S8GW3-PL, KD-HHH9S7EW2-FR, KD-HHH9S7GW2-BX, KD-HHH9S7GW2-EE, KD-HHH9S7GW2-EN, KD-HHH9S7GW2-FR, KD-HHH9S7GW2-IT, KD-HHH9S7GW2-PL, KD-HHH9S8EW3-FR, KD-HHH9S8GW3-EE, KD-HHH9S8GW3-FR, KD-HHH9S8GW3-IT, KD-HHH9S8GW3-PL, KD-NCB8S7GB9-EN, KD-NCB8S7GS9-EN, KD-NCB8S7GW9-EN, KD-NCB9S7GW9-EN, KD-NH8W3-BE, KD-NH9W3-BE, KD-NHA7S7GW21-EE, KD-NHA8S7GW21-EE, KD-NHA9S7GW2-EE, KD-NHB8S7GW21-EE, KD-NHB8S7GW21-IT, KD-NHH0S7GW2-GR, KD-NHH7S7GW2-DE, KD-NHH7S7GW2-EE, KD-NHH8S7GW2-EE, KD-NHH8S7GW2-EN, KD-NHH8S8GW3-DE, KD-NHH8S8GW3-EE, KD-NHH8S8GW3-PL, KD-NHH9S7GW2-EE, KD-NHH9S7GW2-EN, KD-NHH9S7GW2-GR, KD-NHH9S7GW2-PL, KD-NHH9S8GW3-BX, KD-NHH9S8GW3-DE, KD-NHH9S8GW3-EE, KD-NHH9S8GW3-EN
- Bush: TD7CNBCW
- Smeg: D3T7WSA, D3T8SSA, DPW93IT, DT273ES, DT282PIT, DT283ES, DT292PIT, DT383PIT, DT393PIT
- Brandt: BWD58H1DW, BWD58H2DW, BWD58H2WE, BWW8514T, DFB204HAC
Compatible Brands
- Sharp
- Bush
- Smeg
- Brandt
Please check your appliance model number and compare the original part before ordering.
Repair Difficulty
Easy. The pin fits to the inner door and can usually be changed in a few minutes. On most models the door liner or inner panel is held with screws; remove them to reach the pin, fit the new one in the same position and refit the panel.
Typical Tools Required
- Screwdriver (Phillips or Torx, depending on model)
Description
A broken door striker pin is a common reason a tumble dryer refuses to start. The motor and heater may be fine, but without the pin pressing the door switch the dryer will not run. Replacing this small part is a quick and inexpensive way to get the dryer back in use.
This is the genuine part 42190493. Check the pin on your door and your model number against the list above before ordering, or send us your model number and we will check it for you.
Unplug the tumble dryer before working on the door. After fitting, check that the door closes firmly and that the dryer only starts with the door shut.
Brand names, model numbers and part numbers are used for identification and compatibility guidance only. This part should be checked against the original appliance model number and existing part before ordering.
Replacing a faulty appliance part can help extend the life of your appliance and reduce unnecessary waste.
Compatible Models
MPN Number
42190493