Compatible Washing Machine Motor Carbon Brushes - Fits Whirlpool, Indesit, Hotpoint, Bosch and More (Pack of 2)
Compatible Washing Machine Motor Carbon Brushes – Fits Whirlpool, Indesit, Hotpoint, Bosch and More (Pack of 2)
A compatible replacement carbon brush set comparing to Whirlpool/Indesit/Hotpoint reference C00194594 and Electrolux/AEG reference 50265479001. Supplied as a pair (2 brushes), these carbon brushes are designed for use with CESET type motors fitted to a wide range of Whirlpool, Indesit, Hotpoint, Ariston, Bosch, Electrolux, AEG, Siemens, Neff and Zanussi washing machines. If your washing machine stops mid-cycle, fails to spin, or runs intermittently, worn carbon brushes are one of the most common causes and one of the most cost-effective repairs.
Product Details
- Product Type: Washing Machine Motor Carbon Brush Set
- Main Part Number / MPN: C00194594
- Alternative / Cross References: 151613, 50265479001, 481236248004
- Motor Type: CESET type motor
- Brush Dimensions: Approx. 13.5mm × 5mm × 34–40mm (see note above — compare to photos)
- Terminal Size: Approx. 4.8mm small spade terminal
- Material: Carbon brush block with CESET-pattern holder
- Appliance Types: Washing Machine, Washer Dryer
- Brand Compatibility: Whirlpool, Indesit, Hotpoint, Ariston, Bosch, Electrolux, AEG, Siemens, Neff, Zanussi, SMEG, Brandt, Bauknecht
- Part Type: Compatible Replacement
- Pack Includes: 2 × Carbon Brushes (pair)
What This Part Does
Carbon brushes are small blocks of carbon that press against the spinning commutator on the washing machine motor's armature. They conduct electrical current into the rotating part of the motor, enabling the motor to spin the drum. As the brushes wear down over time — they are a consumable contact part — they become too short to maintain reliable contact with the commutator. This causes the motor to run intermittently, stop mid-cycle, or fail to spin the drum at all. Replacing worn carbon brushes is one of the most common and cost-effective washing machine repairs and restores the motor to full working order.
The CESET motor design was used across several major European appliance groups, which is why this same physical brush carries genuine part numbers from more than one manufacturer (Whirlpool/Indesit/Hotpoint C00194594 and Electrolux/AEG 50265479001) as well as independent aftermarket codes.
Common Fault Symptoms
- Washing machine stops mid-cycle (especially during the spin cycle)
- Drum fails to spin or spins erratically
- Machine starts but cuts out shortly after beginning a cycle
- Burning smell from the motor area (under the machine)
- Machine makes no noise when a spin is expected — motor not running
- Drum turns slowly or with reduced power
- Fault codes relating to motor or spin failure appearing on the display
Known Compatible Brands & Models
View compatibility information
These carbon brushes are compatible with a wide range of Whirlpool, Indesit, Hotpoint, Ariston, Bosch, Electrolux, AEG, Siemens, Neff and Zanussi washing machines and washer dryers fitted with CESET type motors. Whirlpool, Indesit, Hotpoint and Ariston share common motors and spare parts as part of the Whirlpool Group, while Bosch, Siemens, Neff, Electrolux, AEG and Zanussi also used the same CESET motor family across various ranges.
Please compare your original brush to the product photos before ordering. Brush length has been reported differently across supplier sources (approximately 34mm to 40mm) — comparing the physical brush is the most reliable way to confirm fit.
Hotpoint Models (UK)
- H7L123PUK, HV5L125PUK, HV5L125PUKE, HV7L145GUK, HV7L145PUK, HV7L145PUKE
- WDF740AUK.C, WDF740GUK.C, WDF740KUK, WDF740PUK, WDF740PUKA, WDF740XUK
- WDL520GUK.C, WDL520PUK.C, WDL540GUK.C, WDL540PUK.C
- WMD740PUK.R, WMD740PUK.RA, WMD740PUKRE
- WMF520PUK.R, WMF520PUK.RA, WMF540GUK, WMF540PUK.R, WMF540PUK.RA
- WMF720GUK.R, WMF720GUK.RA, WMF720PUK.R, WMF720PUK.RA
- WMF740AUK.R, WMF740GUK.C, WMF740GUK.R, WMF740KUK, WMF740KUK.R, WMF740PUK.R, WMF740XUK
- WML520PUK, WML520PUK.C, WML520PUK.CA, WML520PUK.R, WML520PUK.RA, WML520PUKE, WML520PUKRE
- WML540GUK, WML540GUK.C, WML540GUK.R, WML540PUK.C, WML540PUK.CA, WML540PUK.K, WML540PUK.R, WML540PUK.RA, WML540PUK.RE
- WML720PUK.R, WML720PUK.RA, WML720PUKRE
- WML730GUK.R, WML730PUK.R, WML730PUK.RA
- WML740GUK, WML740GUK.R, WML740PUK, WML740PUK.R
Whirlpool Models
- AWM325, AWM326, L94MF7
Other Compatible Brands
- Indesit – IWB, IWC, IWD range washing machines fitted with CESET type motors
- Ariston – washing machines fitted with CESET type motors
- Bosch – WOT and WVF range washing machines
- Electrolux – washing machines fitted with CESET type motors (genuine Electrolux reference 50265479001)
- AEG – washing machines fitted with CESET type motors
- Siemens – washing machines fitted with CESET type motors
- Neff – washing machines fitted with CESET type motors
- Zanussi – washing machines fitted with CESET type motors
- SMEG, Brandt, Bauknecht – selected washing machines fitted with CESET type motors
This list covers known compatible models but is not exhaustive — many additional models across these ranges may also use this brush set, particularly for Indesit, Ariston, Bosch, Electrolux, AEG, Siemens, Neff and Zanussi where brand compatibility is well established but a full model list was not available at time of research. Always verify by comparing your existing brush to the product photos before ordering. If your model is not listed, contact us and we will be happy to help confirm compatibility.
Repair Difficulty
Moderate — suitable for a competent DIY repairer with basic tools. Accessing the motor requires removing the back panel of the machine and disconnecting electrical connectors. Always isolate the appliance from the mains before working on it.
Typical Tools Required
- Torx screwdriver (T20 or T25) or flat-head / Phillips screwdriver depending on model
- Spanner or socket set (to release motor mounting bolts where fitted)
- Multimeter (optional — for testing motor continuity)
Description
Compatible replacement washing machine motor carbon brush set comparing to Whirlpool/Indesit/Hotpoint reference C00194594 and Electrolux/AEG reference 50265479001. Also referenced as 151613, 12ZN03, CAR72 and CBN9213. Supplied as a pair (2 brushes). Specifications: approximately 13.5mm × 5mm × 34–40mm with a 4.6–4.8mm small spade terminal. For use with CESET type motors fitted to Whirlpool, Indesit, Hotpoint, Ariston, Bosch, Electrolux, AEG, Siemens, Neff and Zanussi washing machines and washer dryers.
The CESET motor was used across several major European appliance groups, which is why this brush carries genuine references from more than one manufacturer. This is a compatible replacement — it is not a genuine or OEM part. Please compare the brush shape and dimensions to your original brushes using the product photos before ordering to confirm length and terminal type match your machine's motor.
Always isolate the washing machine from the mains electricity supply before beginning any repair or inspection. Do not attempt to work on the motor while the machine is connected to power. After fitting, check all connections are secure before restoring power.
Brand names, model numbers and part numbers are used for identification and compatibility guidance only. This is a compatible replacement part. Please verify your appliance model number and compare the original carbon brush to the product photos before ordering.
Carbon brushes are a consumable wear part. Replacing them at the end of their service life is far more economical and environmentally responsible than replacing the whole motor or machine. A simple repair that can give a washing machine many more years of service.
Compatible Models
MPN Number
CBN9213