Genuine Bush Logik Tumble Dryer Vent Hose 1.7m 12138200000431
Genuine Bush Logik Tumble Dryer Vent Hose 1.7m 12138200000431
Restore proper venting on your Bush or Logik tumble dryer with this genuine 1.7 metre external vent hose, part number 12138200000431 (also referenced as 301119900060). It carries the warm, damp air from the back of the dryer out through a window or wall vent, so moisture and fluff leave the room instead of settling in your home. Vent hoses are most often replaced when they split, crack, get crushed behind the machine or go missing after a move.
Product Details
- Product Type: Tumble dryer external vent hose (telescopic exhaust pipe)
- Main Part Number / MPN: 12138200000431
- Alternative / Manufacturer References: 301119900060
- Part Category: Tumble dryer venting
- Appliance Types: Vented tumble dryers
- Brand Compatibility: Selected Bush, Logik and Midea vented tumble dryers
- Part Type: Genuine Original Part
- Pack Includes: 1 x vent hose, 1.7 m long, 94 mm diameter
What This Part Does
A vented tumble dryer pushes hot, moist air and fine lint out of an outlet at the back of the machine. This hose connects to that outlet and guides the exhaust air outdoors. It is a telescopic, semi-rigid plastic pipe rather than a soft fabric hose, so it holds its shape and keeps a clear path for the air. Without a sound hose, the damp air escapes into the room and the dryer has to work harder.
Common Fault Symptoms
- The old hose is split, cracked or crushed and warm air or fluff is escaping behind the dryer.
- Condensation is building up on walls and windows while the dryer is running.
- Clothes are taking longer than usual to dry.
- The dryer cuts out or runs very hot because the exhaust air cannot flow freely.
- The original hose was lost or damaged when the dryer was moved.
Known Compatible Brands & Models
View compatibility information
This genuine hose is listed for the vented tumble dryers below. Other Bush and Logik vented models may also use it, so please compare your existing hose (1.7 m long, 94 mm diameter) or contact us with your model number if yours is not shown.
Compatible Models
- Bush TDV6B
- Bush TDV6S
- Bush TDV6W
- Logik LVD6W13
- Logik LVD7W15
- Logik LVD7W18
- Midea SM112
- BFTD7V
Compatible Brands
- Bush
- Logik
- Midea
Please check your appliance model number and compare the original part before ordering.
Repair Difficulty
Easy. The hose fits onto the exhaust outlet at the back of the dryer and the other end runs to your window or wall vent. Unplug the dryer, ease it away from the wall, remove the old hose and fit the new one.
Typical Tools Required
- No tools normally needed
Description
The hose is supplied compressed and extends to around 1.7 metres. Because it is a firm telescopic pipe, extend it gently and route it with smooth bends rather than tight kinks. A short, straight run gives the best airflow and the quickest drying times.
Fitting a genuine replacement hose is a simple way to get a vented dryer working efficiently again, keeping damp air out of your home and helping the machine dry clothes as it was designed to.
Electrical or gas appliance parts should only be fitted by a suitably competent person. Always isolate the appliance before inspection or repair and ensure correct safety checks are carried out after fitting.
Brand names, model numbers and part numbers are used for identification and compatibility guidance only. This part should be checked against the original appliance model number and existing part before ordering.
Replacing a faulty appliance part can help extend the life of your appliance and reduce unnecessary waste.
Compatible Models
MPN Number
12138200000431