Genuine Rangemaster Leisure Main Oven Door Latch Kit A092046
Genuine Rangemaster Leisure Main Oven Door Latch Kit A092046
If your oven door will not stay shut, springs open, or lets heat escape around the top, the door latch is a common cause. This is the genuine main oven door latch kit, part number A092046, with roller catch and striker pin, for Rangemaster, Leisure, Falcon and Flavel cookers.
Product Details
- Part Number: A092046
- Also Listed As: P092046, P092044
- Product Type: Main oven door latch kit (roller catch and striker pin)
- Kit Contents: Roller door catch, striker pin and nut
- Size: Approx. 65mm long x 18mm wide, fixing holes 55mm apart
- Part Category: Cooker and oven door latches
- Appliance Types: Range cookers and freestanding cookers
- Brand Compatibility: Rangemaster, Leisure, Falcon, Flavel (also listed for Tecnik)
- Part Type: Genuine Original Part
- Pack Includes: 1 x door latch kit
What This Part Does
The door latch kit holds the main oven door closed. A spring-loaded roller catch on the cooker grips a striker pin on the door, keeping the door tight against its seal. When the roller wears or the spring weakens, the door no longer stays shut and heat escapes.
Common Fault Symptoms
- The oven door will not stay closed
- The door springs open or drops slightly when released
- Heat or steam escapes around the top of the door
- The roller is worn, loose or broken
- The striker pin is bent or missing
Known Compatible Brands & Models
View compatibility information
This kit is listed by UK parts suppliers for a wide range of Rangemaster, Leisure, Falcon and Flavel cookers. The ranges and model codes below are a sample; please compare your old latch with the photos and dimensions, or send us your model number.
Compatible Models
- Rangemaster: Classic 55, Classic 90, Professional 90, Chef Centre 110, Victorian, Victoriana, 5331, 5337, 5344, 5364, 5365, 5367, 5394, 5395, 5407, 5420, 5421, 5422, 5439, 5444, 5487, 5489, 5593
- Leisure: 5464, 5473, 5504, 5637
- Falcon: 1092, Continental 900S
- Tecnik: 5766, 5779, 6094
Compatible Brands
- Rangemaster, Leisure, Falcon, Flavel, Tecnik
Please check your appliance model number and compare the original part before ordering.
Repair Difficulty
Easy to moderate. Switch off and let the oven cool. Remove the screws holding the old catch to the cooker frame and fit the new one in its place. Swap the striker pin on the door if yours is worn, then check the door closes firmly.
Typical Tools Required
- Screwdrivers
- Spanner or pliers for the striker nut
Description
Part number A092046 (also listed as P092046 and P092044). The kit contains the roller catch, striker pin and nut. The catch is approximately 65mm long and 18mm wide, with fixing holes 55mm apart.
Manufacturers sometimes change door latches during production, so please compare your old catch with the photos and dimensions. Your model number is on the rating plate, usually behind the door or on the back. If you are unsure, send us your model number and we will check it for you.
Electrical or gas appliance parts should only be fitted by a suitably competent person. Always isolate the appliance before inspection or repair and ensure correct safety checks are carried out after fitting.
Brand names, model numbers and part numbers are used for identification and compatibility guidance only. This part should be checked against the original appliance model number and existing part before ordering.
Replacing a faulty appliance part can help extend the life of your appliance and reduce unnecessary waste.
Compatible Models
MPN Number
A092046